D10CS — representative 10-core cable with matching cross section.
View Full-size Cross Section ↗

Industrial Control Cable

Tinned CU/TPE | PVC/PVC 300/300V Flame-retardant Screened Industrial Control Cable

Model / D10CS

Rated Voltage
300/300V
Materials
Tinned CU/TPE | PVC/PVC
Custom Option Standards
  • UL 758
Features
Flame-retardant / Screened / Oil-resistant / Abrasion-resistant / Drag-chain endurance: 10M cycles / High-strength sheath / Low-tack sheath
Temperature

Fixed: −15 to 80 °C

Moving: −5 to 70 °C

Download Product Data ↓

Product Reference: xr-industrial-d10cs-d10cs

Construction

Conductor Material
Tinned Copper
Conductor Form
Extra Fine Stranded
Insulation Material
TPE Below 0 5mm2 Else Special PVC
Stranding
Optimized Lay
Braid Screen
Tinned Copper Wire Braid
Outer Sheath Material
PVC
Insulation (Cross section < 0.5 mm²)
TPE
Insulation (Cross section ≥ 0.5 mm²)
Special PVC
Separation
Peelable Nonwoven Tape

Features

Flame Retardant
Yes
Drag-chain Cycles
10000000
Oil Resistant
Yes
Abrasion Resistant
Yes

Operating Conditions

Temperature · Fixed Installation

−15 to 80 °C

Temperature · Moving Installation

−5 to 70 °C

Bending & Motion

Minimum Bending Radius · Fixed

≥ 6 D

Minimum Bending Radius · Moving

≥ 8 D

Maximum Speed · Unsupported

≤ 5 m/s

Maximum Speed · Gliding

≤ 3 m/s

Maximum Acceleration

≤ 50 m/s²

Travel Length

50 m

Bending Endurance

10,000,000 cycles

Electrical & Test Requirements

Insulation Resistance

≥ 20 MΩ·km

Voltage Test Requirement

1,500 V

Flame Test Requirement
  • IEC 60332-1
  • CEI 20-35

Construction & Material Notes

Conductor Class

6 · IEC 60228 / VDE 0295

Screen Coverage
Wire Coverage
85 %
Optical Coverage (unit not stated)
≥ 85
Core Identification

Colour-coded insulated cores; the source describes black cores with a green/yellow protective conductor for cross-sections 0.3 mm2 and above.

Construction Notes
  • Insulated cores laid up around a tensile centre element with an optimised lay length.
  • Peelable nonwoven separator.
Sheath Properties
  • High strength
  • Low surface tack
  • Abrasion resistance
  • Oil resistance
Sheath Colours
Values
black · gray · orange · green

Applications

Applications

Machinery and automation with repeated drag-chain movement.

Installation & Ordering

Installation
  • Unreel without introducing spiral twist.
  • Do not tie or clamp cables together in the moving bend zone.
  • Avoid bending immediately at terminals and prevent oil entering cable ends.
Drag-chain Installation
  • Allow the cable to follow the drag-chain centreline without tension or excessive slack.
  • Secure at the ends, not in the moving section.
  • Separate different diameters with dividers and keep cables apart from air hoses.
Drag-chain Installation Limits
General Minimum Bend Radius (× Outside Diameter)
6
Moving Section Clamping Permitted
No
End Fixing Required
Yes
Cable Separation Required
Yes
Dividers Required For Large Diameter Differences
Yes
Dividers Required Between Cables And Air Hoses
Yes

Dimensions & Reference Values

Dimensions & reference values

Cross section (mm²)CoresOutside diameter (mm)Mass (kg/km)
0.224.530
0.234.836
0.245.242
0.255.450
0.265.856
0.286.573
0.2107.687
0.2127.795
0.2147.797
0.2167.8102
0.2208.5125
0.2249.6142
0.324.836
0.334.837
0.345.245
0.355.559
0.366.271
0.38778
0.3107.899
0.3127.5100
0.3148113
0.3168.5136
0.3209.3160
0.32411.6201
0.525.851
0.536.268
0.546.580
0.556.889
0.567.698
0.588.6130
0.5109.6158
0.5129.5163
0.5149.8192
0.51610.5223
0.52011.5303

Specification Ranges

Core & conductor combinations

Core configurationCross section (mm²)
2 / 3 / 4 / 5 / 6 / 8 / 10 / 12 / 14 / 16 / 20 / 240.2
2 / 3 / 4 / 5 / 6 / 8 / 10 / 12 / 14 / 16 / 20 / 240.3
2 / 3 / 4 / 5 / 6 / 8 / 10 / 12 / 14 / 16 / 200.5

Product Record

Tinned CU/TPE | PVC/PVC 300/300V Flame-retardant Screened Industrial Control Cable

Model: D10CS
Reference: xr-industrial-d10cs-d10cs

Catalogue Tags: industrial-flexible · drag-chain · industrial-control · flame-retardant · screened

View the Public JSON Record

View the Standards Data