D02C — representative 2-core cable with matching cross section.
View Full-size Cross Section ↗

Industrial Control Cable

Tinned CU/Special PVC/PVC 300/300V Flame-retardant Industrial Control Cable

Model / D02C

Rated Voltage
300/300V
Materials
Tinned CU/Special PVC/PVC
Standards
  • IEC 60228
Features
Flame-retardant / Abrasion-resistant / Drag-chain endurance: 2M cycles / High-strength sheath / Low-tack sheath
Temperature

Fixed: −5 to 80 °C

Moving: −5 to 70 °C

Download Product Data ↓

Product Reference: xr-industrial-d02c-d02c

Construction

Conductor Material
Tinned Copper
Conductor Form
Extra Fine Stranded
Insulation Material
Special PVC
Stranding
Optimized Lay
Outer Sheath Material
PVC
Separation
Peelable Nonwoven Tape

Features

Flame Retardant
Yes
Drag-chain Cycles
2000000
Abrasion Resistant
Yes

Operating Conditions

Temperature · Fixed Installation

−5 to 80 °C

Temperature · Moving Installation

−5 to 70 °C

Bending & Motion

Minimum Bending Radius · Fixed

≥ 6 D

Minimum Bending Radius · Moving

≥ 8 D

Maximum Speed · Unsupported

≤ 2 m/s

Maximum Speed · Gliding

≤ 1 m/s

Maximum Acceleration

≤ 20 m/s²

Travel Length

50 m

Bending Endurance

2,000,000 cycles

Electrical & Test Requirements

Insulation Resistance

≥ 20 MΩ·km

Voltage Test Requirement

1,500 V

Construction & Material Notes

Conductor Class

6 · IEC 60228 / VDE 0295

Core Identification

Colour-coded insulated cores; the source describes black cores with a green/yellow protective conductor for cross-sections 0.3 mm2 and above.

Construction Notes
  • Insulated cores laid up around a tensile centre element with an optimised lay length.
  • Peelable nonwoven separator.
Sheath Properties
  • High strength
  • Low surface tack
  • Abrasion resistance
Sheath Colours
Values
black · red · orange · green

Applications

Applications

Machinery and machine tools: fixed installation or occasional movement.

Installation & Ordering

Installation
  • Unreel without introducing spiral twist.
  • Do not tie or clamp cables together in the moving bend zone.
  • Avoid bending immediately at terminals and prevent oil entering cable ends.
Drag-chain Installation
  • Allow the cable to follow the drag-chain centreline without tension or excessive slack.
  • Secure at the ends, not in the moving section.
  • Separate different diameters with dividers and keep cables apart from air hoses.
Drag-chain Installation Limits
General Minimum Bend Radius (× Outside Diameter)
6
Moving Section Clamping Permitted
No
End Fixing Required
Yes
Cable Separation Required
Yes
Dividers Required For Large Diameter Differences
Yes
Dividers Required Between Cables And Air Hoses
Yes

Dimensions & Reference Values

Dimensions & reference values

Cross section (mm²)CoresOutside diameter (mm)Mass (kg/km)
0.1423.611
0.1433.815
0.1444.220
0.1454.426
0.1464.632
0.148541
0.1410653
0.14126.260
0.14146.672
0.14166.882
0.14207.292
0.14248.2118
0.22420
0.234.230
0.244.537
0.254.836
0.265.245
0.285.554
0.2106.266
0.2126.896
0.2146.898
0.2167.2110
0.2207.8125
0.2248.8149
0.324.224
0.334.532
0.34543
0.355.252
0.365.360
0.38681
0.3106.897
0.3127109
0.3147.6138
0.3167.8160
0.3208.8196
0.32411.2236
0.525.236
0.535.540
0.54653
0.556.261
0.566.881
0.587.8101
0.5108117
0.5128.5118
0.5149.2152
0.5169.5170
0.52011266

Specification Ranges

Core & conductor combinations

Core configurationCross section (mm²)
2 / 3 / 4 / 5 / 6 / 8 / 10 / 12 / 14 / 16 / 20 / 240.14
2 / 3 / 4 / 5 / 6 / 8 / 10 / 12 / 14 / 16 / 20 / 240.2
2 / 3 / 4 / 5 / 6 / 8 / 10 / 12 / 14 / 16 / 20 / 240.3
2 / 3 / 4 / 5 / 6 / 8 / 10 / 12 / 14 / 16 / 200.5

Product Record

Tinned CU/Special PVC/PVC 300/300V Flame-retardant Industrial Control Cable

Model: D02C
Reference: xr-industrial-d02c-d02c

Catalogue Tags: industrial-flexible · drag-chain · industrial-control · flame-retardant

View the Public JSON Record

View the Standards Data