D05D — representative 2-core cable with matching cross section.
View Full-size Cross Section ↗

Industrial Power Cable

Tinned CU/Special PVC/PVC 300/500V Flame-retardant Industrial Power Cable

Model / D05D

Rated Voltage
300/500V
Materials
Tinned CU/Special PVC/PVC
Custom Option Standards
  • UL 758
Features
Flame-retardant / Oil-resistant / Abrasion-resistant / Drag-chain endurance: 5M cycles / High-strength sheath / Low-tack sheath
Temperature

Fixed: −15 to 80 °C

Moving: −5 to 70 °C

Download Product Data ↓

Product Reference: xr-industrial-d05d-d05d

Construction

Conductor Material
Tinned Copper
Conductor Form
Extra Fine Stranded
Insulation Material
Special PVC
Stranding
Optimized Lay
Outer Sheath Material
PVC
Separation
Peelable Nonwoven Tape

Features

Flame Retardant
Yes
Drag-chain Cycles
5000000
Oil Resistant
Yes
Abrasion Resistant
Yes

Operating Conditions

Temperature · Fixed Installation

−15 to 80 °C

Temperature · Moving Installation

−5 to 70 °C

Bending & Motion

Minimum Bending Radius · Fixed

≥ 6 D

Minimum Bending Radius · Moving

≥ 8 D

Maximum Speed · Unsupported

≤ 3 m/s

Maximum Speed · Gliding

≤ 2 m/s

Maximum Acceleration

≤ 20 m/s²

Travel Length

50 m

Bending Endurance

5,000,000 cycles

Electrical & Test Requirements

Insulation Resistance

≥ 20 MΩ·km

Voltage Test Requirement

2,000 V

Flame Test Requirement
  • IEC 60332-1
  • CEI 20-35

Construction & Material Notes

Conductor Class

6 · IEC 60228 / VDE 0295

Core Identification

Colour-coded insulated cores with a green/yellow protective conductor; for the unscreened power variants this is specified for three or more cores.

Construction Notes
  • Insulated cores laid up around a tensile centre element with an optimised lay length.
  • Peelable nonwoven separator.
Sheath Properties
  • High strength
  • Low surface tack
  • Abrasion resistance
  • Oil resistance
Sheath Colours
Values
black · orange

Applications

Applications

Machine power transmission, power control and servo-motor supply connections.

Installation & Ordering

Installation
  • Unreel without introducing spiral twist.
  • Do not tie or clamp cables together in the moving bend zone.
  • Avoid bending immediately at terminals and prevent oil entering cable ends.
Drag-chain Installation
  • Allow the cable to follow the drag-chain centreline without tension or excessive slack.
  • Secure at the ends, not in the moving section.
  • Separate different diameters with dividers and keep cables apart from air hoses.
Drag-chain Installation Limits
General Minimum Bend Radius (× Outside Diameter)
6
Moving Section Clamping Permitted
No
End Fixing Required
Yes
Cable Separation Required
Yes
Dividers Required For Large Diameter Differences
Yes
Dividers Required Between Cables And Air Hoses
Yes

Dimensions & Reference Values

Dimensions & reference values

Cross section (mm²)CoresOutside diameter (mm)Mass (kg/km)
0.525.853
0.536.365
0.546.871
0.7526.460
0.7536.879
0.7547.290
126.865
137.286
147.8104
1.527.884
1.538.2123
1.549136
2.529.2116
2.539.8158
2.5410.8188
4414285

Specification Ranges

Core & conductor combinations

Core configurationCross section (mm²)
2 / 3 / 40.5
2 / 3 / 40.75
2 / 3 / 41
2 / 3 / 41.5
2 / 3 / 42.5
44

Product Record

Tinned CU/Special PVC/PVC 300/500V Flame-retardant Industrial Power Cable

Model: D05D
Reference: xr-industrial-d05d-d05d

Catalogue Tags: industrial-flexible · drag-chain · industrial-power · flame-retardant

View the Public JSON Record

View the Standards Data