Construction
- Conductor Material
- Tinned Copper
- Conductor Form
- Extra Fine Stranded
- Insulation Material
- Special PVC
- Stranding
- Optimized Lay
- Braid Screen
- Tinned Copper Wire Braid
- Outer Sheath Material
- PVC
- Separation
- Peelable Nonwoven Tape
Features
+
- Flame Retardant
- Yes
- Drag-chain Cycles
- 2000000
- Abrasion Resistant
- Yes
Operating Conditions
+
- Temperature · Fixed Installation
−5 to 80 °C
- Temperature · Moving Installation
−5 to 70 °C
Bending & Motion
+
- Minimum Bending Radius · Fixed
≥ 6 D
- Minimum Bending Radius · Moving
≥ 8 D
- Maximum Speed · Unsupported
≤ 2 m/s
- Maximum Speed · Gliding
≤ 1 m/s
- Maximum Acceleration
≤ 20 m/s²
- Bending Endurance
2,000,000 cycles
Electrical & Test Requirements
+
- Insulation Resistance
≥ 20 MΩ·km
- Voltage Test Requirement
2,000 V
Construction & Material Notes
+
- Conductor Class
6 · IEC 60228 / VDE 0295
- Screen Coverage
- Wire Coverage
- 60 %
- Optical Coverage (unit not stated)
- 60
- Core Identification
Colour-coded insulated cores with a green/yellow protective conductor; for the unscreened power variants this is specified for three or more cores.
- Construction Notes
- Insulated cores laid up around a tensile centre element with an optimised lay length.
- Peelable nonwoven separator.
- Sheath Properties
- High strength
- Low surface tack
- Abrasion resistance
- Sheath Colours
- Values
- black · orange
Applications
+
- Applications
Machine power transmission, power control and servo-motor supply connections.
Installation & Ordering
+
- Installation
- Unreel without introducing spiral twist.
- Do not tie or clamp cables together in the moving bend zone.
- Avoid bending immediately at terminals and prevent oil entering cable ends.
- Drag-chain Installation
- Allow the cable to follow the drag-chain centreline without tension or excessive slack.
- Secure at the ends, not in the moving section.
- Separate different diameters with dividers and keep cables apart from air hoses.
- Drag-chain Installation Limits
- General Minimum Bend Radius (× Outside Diameter)
- 6
- Moving Section Clamping Permitted
- No
- End Fixing Required
- Yes
- Cable Separation Required
- Yes
- Dividers Required For Large Diameter Differences
- Yes
- Dividers Required Between Cables And Air Hoses
- Yes
Dimensions & Reference Values
+
Dimensions & reference values
Specification Ranges
Core & conductor combinations
Product Record
Tinned CU/Special PVC/PVC 300/500V Flame-retardant Screened Industrial Power Cable
Model: D02DS
Reference: xr-industrial-d02ds-d02ds
Catalogue Tags: industrial-flexible · drag-chain · industrial-power · flame-retardant · screened
View the Public JSON Record↗View the Standards Data↗